EZ-Router Owners . . .

[CNCCajun]

EZ-Router Owners . . .would love to hear about your machine . . .

I visited EZ-Router recently & I must say they have a very nice operation . . . There were at least 1/2 a dozen new machines crated and wrapped waiting for the trucking company to carry them to new homes . . .

I got an excellent tour of there facility. They answered every question I asked even after I told them that I would most likely be a DIY home built.

Although to have some very sturdy well engineered components that I will be seeking, such as there belt reduction unit. It is based on a 1/2" thick piece of steel plate.

My next trip coming up I plan to visit PlasmaRoute in OK.

Hope this starts a dialogue on EZ-Router . . . .

Steve

[SASMachine]

I have been visiting the zone for many months now but this is my first post.

I own both a plasma and a router machine from ez-router. i have been nothing but pleased with both of them. I run both machines at lease 4 days a week all day long and i have never had any problems. i have had to call their tech support a couple of times but it has always been user error and the guys at ez-router have always been very helpful.

Brandon in sales is the guy to talk to if you are interested in a machine. he is very knowledgable and is not pushy. Both Jacob and John have both been helpful in the Tech Support department.

I give ez-router a thumbs up. As long as business keeps growing i hope to go back to ez-router and buy more machines.

Scott

[mohamedmetwally]

I also have EZ plasma cutter imported from the States to Egypt through a friend who has a license to import goods.I am quite busy to set down and start running it any how i leveled it and try the road runner program without activating the torch but not further.
when i try to home the Z axis the torch keeps diving down even after triggering the home switch and the motor still pushing the torch down until l push the reset button. i need to say that also the z axis works only down regardless if you push z++ or z__ buttons unfortunatly the operation manual was lost during the long journy from the states to Egypt. Can any the good people help to solve this issue.accept my regards

[B_R]

mohamedmetwally,

Have you contacted our Tech Support about this problem. Please give us a call or shoot an email over to support@ez-router.com. Our Tech Support will get you going. Always feel free to contact us with any problems or questions.

Thanks,

Brandon Roberts
Sales Manager
ez-Router Inc.

[mohamedmetwally]

Brandon
sorry to write about my ez plasma problem before contacting your tech support
I think this was what I should do first. thanks for your reply and I am going to write to you about the plasma cutter problem and I am sure about your help and support.
my email address is mohammed.metwally@halliburton.com

with my regards

mohammed metwally

[Joe Crumley]

Greetings Fellows,

I need some help with my EZ. She jamed up today and I haven't been able to Referance back to home. I'm getting an error message "Limit switch tripped". I can move the gantry around if I turn of the Limit Switch. I can' get much responce at this time.

Sure would appreciate a little help.

I called their support but doubt they will give me much help.

Joe Crumley
Norman Sign Company, Norman, Oklahoma, SandBlasted Signs, Sign Painter, Redwood Signs

[cabnet636]

joe i am sure you know a limit switch is a simple low voltage contact switch, generally if you can turn it off in the software ( i presume mach) and operate then check the wiring first switch second with a multimeter, a grainger supply should have another switch