Problem 2006 machine motors are out of sync


Results 1 to 2 of 2

Thread: 2006 machine motors are out of sync

  1. #1
    Registered
    Join Date
    Dec 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default 2006 machine motors are out of sync

    i have a 5 x 12 router with a rotary and some time ago the z drive would trip "limit switch" if i ran it passed 50ipm and now the drive on the side opposite x0 y0 consistently runs 3/8 from the reset switch block no matter turning the machine off, clamping the switch closed, tighten the turn buckle and switch the machine on ... run a tool path and hit zero out and it is 3/8" from the limit stop

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: 2006 machine motors are out of sync

    should be august 2008 machine



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

2006 machine motors are out of sync

2006 machine motors are out of sync