Mach3 vs DSP

[Eclipze]

Ok... I have confirmation with Jerry. If you order with DSP, then you get the DSP and DSP control interface board. If you order with Mach3, then you get a different control interface board. So if you wanted to convert an existing DSP setup to run from Mach3, the simple solution is to contact them to obtain the Mach3 interface card.

I'm still going to design my own card... just can't help but add the extra features like my other CNC :-)

[7of9]

Originally Posted by Kelinginc We make many Mach3 contoller with the 6090 machine in China It is running better. Page Title

Hi,

I have a Quick Jinan ATC (8 Tools) 1325. All Motors are Servos / 4-axis.
Now I am thinking about changing the DSP to Mach3 to be able to use all 4 axis simualtanously - at the moment I have to switch 1 axis / to plug the c-axis.
Do you have a "ready to go" solution for me to change to mach3?
When I understood right I would need the board and perhaps another board to control the spindle speed via G-Code?

Hope anybody could help me

best

kai