Excitech Cnc Router Purchase

[jorgearma0205]

[maccaro15]

hello every body, I own an exhitech 1325A router since a year ago, everything was OK until I had a problem with my DSP hanset, I sent it back to China and they replace it for a new one. the problem is that as soon as I plug the new DSP it display "Z- hard limit triged, STOP to rebooth, DELETE to adjust Z position" and the same message for Y axis. I wait for some help ,yhanks

[Melkiades]

It's can be wire problem, mispolarity setting in DSP or broken sensor.
Download DSP 0501 user's manual and read it first.

[maccaro15]

Originally Posted by Melkiades It's can be wire problem, mispolarity setting in DSP or broken sensor. Download DSP 0501 user's manual and read it first.

I already read the manual, but can not find this issue. Isn't a matter of changing parameters on the menu?

[Melkiades]

1. Find wires coming to cross board from Z and Y sensors. Ensure power going to sensors well
2. Force sensor triggered moving flat screwdriver in it. ensure sensor is working.
3. Go to input voltage check menu in DSP. Check that arrow change direction when sensor triggered. If arrow comes down - go to axis sensor settings and choose appropriate axis sensor to negative (-), otherwise positive.

It should help

[m.aioun]

Dear frinds:
I have Excitech SHMS1530C with rotary axis. I have it for 5 month.
i need help to know: how does work the rotary axis with syntec controller??
please i need manual for this option
and how can i prepare the NC file on Art CAM for rotary axis
thanks.