Compatible USB stick for DSP

[bananafish]

I heard many people in the forum trouble finding a compatible USB memory stick for Chinese DSP controller.

I have Exitech router late 2009 model with DSP.

I just bought a SanDisc " Cruzer Micro USB 2.0 Flash Drive " 2GB from Dick Smith for $10. And it did work with my DSP.
Also my old Sony 1GB one worked as well.

[bobsch]

It may be a size issue. I've seen a few situations on other kinds of equipment where sticks larger than 2 GB won't work. Not real common, but it's a possibility.

[ksanalytical]

I've been working with an unrelated project that had problems with memory cards that were too large. The simplest solution was to format them to a smaller size, it was just easier than finding small drives.

Ken

[bananafish]

Originally Posted by bananafish I heard many people in the forum trouble finding a compatible USB memory stick for Chinese DSP controller. I have Exitech router late 2009 model with DSP. I just bought a SanDisc " Cruzer Micro USB 2.0 Flash Drive " 2GB from Dick Smith for $10. And it did work with my DSP. Also my old Sony 1GB one worked as well.

Sorry Guys
One I mentioned in my original post "SanDisc" DOES NOT comply with DSP.
Not even that it corrupted DSP configuration.

Please refer beermans thread "USB problem Excitech"for further info.
http://www.cnczone.com/forums/excite..._excitech.html

[Inuk]

Size matters. Finally found a generic 1G USB stick that works with the pendant, ...sort of. The USB files are listed but they won't run. It'll show the process screen but confirming it returns to the Origin data display without any action....anybody ?