Excitech Cnc Router Purchase - Page 131


Page 131 of 131 FirstFirst ... 3181121128129130131
Results 2,601 to 2,603 of 2603

Thread: Excitech Cnc Router Purchase

  1. #2601
    Registered
    Join Date
    Mar 2008
    Location
    nigeria
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Re: Excitech Cnc Router Purchase

    Quote Originally Posted by bjd123456 View Post
    Hello ,is there anybody intersted in panel furniture cnc machine ?Attachment 293878
    whats your website? my email is deacongate@yahoo.com



  2. #2602
    Registered
    Join Date
    Feb 2009
    Location
    Italy
    Posts
    52
    Downloads
    0
    Uploads
    0

    Default Re: Excitech Cnc Router Purchase

    ---



  3. #2603

    Default Re: I found this but......

    Quote Originally Posted by bananafish View Post
    I found an English DSP manual which I have downloaded from this forum.
    Here is the copy.
    ================================================== ==

    Home Setup
    Home Function
    “Home” is the machine origin. “Go to home” refers to moving all axes back to the machine
    origin. Home position depends on home sensor. Normally there are 3 sensors on a 3-axis
    machine. “Go to home” operation sets up the relationship between the machine and the
    working co-ordinates. Many system function applications rely on this operation, such as stop
    point save, power off reboot and so on.
    It is good practice to home a machine after switching the power on.
    If you enter the menu by pressing ,"MENU" please press "STOP/CANCEL"to exit and return to MANL
    as no changes are required here under normal use.
    Home Operating
    When the power is turned on, “Go to Home?” appears on the screen: this is a question
    which will need to be answered by the operator:
    Pressing "ORIGIN/OK"means “Yes”- the Z axis moves first; when the Z axis arrives at its home
    position, the X and Y will also move to the home position.
    Pressing "RUN/PAUSE/DELETE" means “No”- the 3 axes do NOT move to their home positions.
    Pressing any other KEY- Only the Z axis moves to home position; X and Y do NOT go home.
    When the machine is moving to the home position, you can press the KEY to stop
    “Homing”. The controller is now in Manual Mode. Pressing "HOME/9" will move the machine to
    home when in manual mode.
    Pressing "XY-0/4" will zero X & Y. Pressing "Z-0/8" will zero Z creates an origin point which
    the pendant controller uses when running a CNC program.
    Pressing will move the machine to the origin point for the current working
    coordinate when in manual mode.
    1X 0.000, 1Y 0.000, 1Z 0.000

    ================================================== ======
    According to this manual. Origin and Home should be the same which is XYZ0.
    I have set the new XY zero point by pressing "XY-0/4".
    After reset new XY zero point when I press "ORIGIN/OK" the spindle goes to new XYzero point. But when I press "HOME" key spindle goes past the point till hit the limit sensor.
    Is this normal ?
    I need a copy of this manual. Could you please share it to me.



Page 131 of 131 FirstFirst ... 3181121128129130131

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Excitech Cnc Router Purchase

Excitech Cnc Router Purchase