BLUM LASER TECHNOLOGY

[CncNutter]

Hi all,

i wonder if anyone can help? I need to set my (X) Axis position for my Blum tool measuring system. Does anyone know where in the control I do this? I am using Siemens 840d sl on a Unipro 5000 5 axis machining centre. Any help would be much appreciated.

thanks in advance

CncNut

Similar Threads:

• DMV50V Blum Laser presetting tools
• Hermle C 30 U BLUM laser help
• BLUM laser help
• Blum laser tool setting
• Blum laser macros

[blum-novotestusa]

Hi CncNutter,

On a Siemens control, Blum cycles usually in the "Manufacturer cycles" (CMA.DIR)
The parameter file name should be: USERPARATAB1.SPF
There are three variable for the location on the laser.
_B_BP[0]=-342.2148 _B_BP[1]=-20.473 _B_BP[2]=359.1902

If you have additional questions you can always give a quick call @ 859-344-6789

[CncNutter]

Thanks for the reply. What is the standard Blum calibration cycle that is normally used? Is it BL9901?

Thanks

CncNut

[blum-novotestusa]

Yes, that is the correct cycle for calibration. If you'd like you can PM me with your email and we can send a copy of the manual with actual examples for you to follow.

Or... I see you are located in the UK. You can always contact our subsidiary there for a much faster response. Their info is:

Blum-Novotest Ltd.
Unit 15 Granary Wharf Business Park
Wetmore Road
Burton on Trent, Staffordshire
DE14 1DU
United Kingdom

Phone: +44 (0) 1283 569691
Fax: +44 (0) 1283 563687
info@blum-novotest.co.uk
Blum Novotest GmbH | Messtechnik & Prüftechnik | Messtaster | Lasermesssysteme | Messmaschinen | Prüfstände

Hope this helps.

[CncNutter]

Hi,

Yes I contacted them shortly after my original post on here and they were very helpful. After a few hours of banging my head against a brick wall, I eventually found that a line had been mysteriously deleted out of one of the user cycles. It was by pure luck and determination that I found it really! Very frustrating, but all working as it should now. Thank you for your help.

CncNut

[Vshep]

Hello, We have identical situation. 5axes machine with 840d sl . Need to change the point of measuring system Blum. We try to change USERPARATAB1 coordinates _B_BP[0]=-315.049 to -317.30 . But changes was not accepted. Tool came to old point -315.049 during measuring cycle such as tool lenght measuring or calibration cycle BL99**.
Can you help how are you solved it?