- My first CNC operator course
-
Registered
My first CNC operator course
Hi all!
This is my first post here.
I am Croatian and I don't have any experience with CNC until now. I was interested in it and now I have opportunity to start a course and learn to be machine operator.
The course is 3 months long with 90 hours of practical work. We will work on mill HAAS VF2SS and lathe HAAS ST20.
Since we have very bad economic situation here, I have a plan to move to Germany and look for work. I thought this course would increase my chances to get a good job.
I speak German and English, so that wouldn't be a problem. I believe I can do the course well and I am ready to work very hard. The course is very expensive for our standard and I am trying to get every information I can before I sign up.
The reason I wrote this post is I wanted to ask you:
Do you think this course is long enough to actually learn enough to work independently? If performed well, off course.
Do you know if those 2 machines are common in production in Germany?
Is it hard to adjust to different machines later?
Thanks in advance for your answers.
Clash81
Similar Threads:
-
- My first CNC operator course
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules