Just IN- greetings from Pajottenland - Belgium

[marc_256]

Hi, greetings from Pajottenland - Belgium
My first step in the 3D cnc world, so I'm looking for some informations (help).
My idea is to build a simple XYZ table first, 1000 x 1000 x 500 mm usable surface.
Later... much later a 5 axis system (XYZ axis + rotation of the part and inclination).
So I'm trying to do some drawings first, before building some stuff.
I'm working with second hand parts, so I have to buy them first, and then make the drawings.
For my Z-axis I have all ready the two linear guides with roller blocs (bearings).
Measurements about 700 mm x 300 mm x 100 mm (LxWxD).
Here one of my first 3D drawings of my Z-axis without the spindle.
The rendering of this first picture toke about 1 hrs 21 min 33 sec on my (slow) computer,
and several days to enter (build) the parts in the virtual 3D world (3D-program) :-(.

I'm new on this forum,
and I'm looking for a free software to do 3D works on the computer,
and send the data to the 3D XYZ table.
What is a good software ?

Greetings, Marc.
Write you soon.