Osai A-B 8600

[JORGE ARAYA]

How can enter the program of the machine, to review the program and see what can be wrong. If it is possible that file is needed to verify, it is possible to see the program only through the operator's screen or via a laptop.

thanks

[JORGE ARAYA]

the battery voltage is correct 4 (v) that other causes may have to review.

[delonet]

If your problem is that the 8600 board display only ??? is that lost parameter for working

you first inizialize memory, after chek pres P0 in control panel, then when appear job you must write
INI,MP0,/MP0
INI,MP1,/MP1

now if you type
DIR/MP0 or DIR/MP1
you can see the free block

then you need to load or insert with editor 2 important file
first is FCRSYS and the FILCAR.

you can create it typing

EDI,FCRSYS/MP0

and

EDI,FILCAR/MP0

but you must write the parameter of your machine

I have it mounted on a galaxy
the FCRSYS is similar in same machine but the FILCAR depending from hardware.

[Ing JTardini]

Hello everybody,
I need a help for OSAI AB 8600 cn
I can as soon as posible operation manual for these CN.
Thanks

[fezima]

I was able to fix some of the hardver problem and startup the OSAI 8600
controller.

I am trying to do a "System Clearout"

which means that some of the memory segments have to be erased.

I have got the following message during the process

""

FILMS1 29 OUT OF MEMORY. this means that " A non existing address has
been addressed with the DEBUG utility".

I have typed the correct memory segment and it is still giving the same
error message.

Please help me on this or tell me who can I turn to related to my issue.


Thanks

Ferenc

[JORGE ARAYA]

i need help cnc giddings & lewis VTL 48.how I can repair a OPstation 501-04305-00 BD card which has video problems, have the manual for this cnc

[djm8601]

why not contact the CNC manufacturer? See PRIMA ELECTRO | electronics and laser technologies

[khengui mohamed]

Originally Posted by Ing JTardini Hello everybody, I need a help for OSAI AB 8600 cn I can as soon as posible operation manual for these CN. Thanks

We have a SAMPUTENSILI OSAI A-B cnc 6800 Grinding machine that is failed.
We are kindly request a help to solve this problem.

1. Even we execute RUN,DEBUG
We can t get the INI MENU on the screen video to fill the memories OS 5241 and OS 5OO5 with zeros “0”

‘ Menu: [Modify | Copy | Fill | Display | Exit] ‘

2. How to reset OS5241 and OS 5005

Thanks
Best regards