toolpath cannot be created because of unmatched feature or Esprit 2014


Results 1 to 1 of 1

Thread: toolpath cannot be created because of unmatched feature or Esprit 2014

  1. #1
    Registered
    Join Date
    Feb 2015
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default toolpath cannot be created because of unmatched feature or Esprit 2014

    Trying to do a simple round punch that has a diameter of .748 with a .052 dia tab on it. I want to do a rough-skim-cutoff and I keep getting the "toolpath cannot be created because of unmatched feature or" I have had this before when doing die sections with tight radii in corners. If you tell it to do rough-skim it does not error, but of course thats worthless as its impossible to make a punch like that. Wasted almost the entire day beating my head against the wall......

    I attached a .dxf so you can see the shape, I altered the inside radii to as much as .012 trying to get it to go.


    Similar Threads:
    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

toolpath cannot be created because of unmatched feature or Esprit 2014

toolpath cannot be created because of unmatched feature or Esprit 2014