Importing FlexiSIGN (.fs) files into EnRoute

[srouter]

I am using EnRoute 4.1 and need to open FlexiSIGN 8.1 files.

Right now we have to export the files from FlexiSIGN and save them as a .dxf.

When I try to open the .fs file, it opens blank.

It would be nice to open the .fs directly and save a step.

I noticed when I try to import a .fs file, EnRoute only has the option for FlexiSIGN 5.x.

These two programs are made by the same company, so I think that they should work better together.

Any help is appreciated.

Thanks, Bill

[tgm]

You should be able to use the File option 'SEND TO ENROUTE' which will send the file directly to Enroute as a dxf. It used to work with v3.3 but I have not used it with v4.1.
Worked pretty slick if I remember right.

Good Luck,

Tom in PA

[srouter]

Originally Posted by tgm You should be able to use the File option 'SEND TO ENROUTE' which will send the file directly to Enroute as a dxf. It used to work with v3.3 but I have not used it with v4.1. Worked pretty slick if I remember right. Good Luck, Tom in PA

I just tried this, but we can't do it because we are using two different computers.