| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Engraving Machines Discuss Engraving Machines here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-11-2009, 08:23 PM
| |||
| |||
I have had an engraving machine (hermes v3400 release 2.07) serial parallel EP control module sent to me to engrave lable plates. It (the software) runs on win95plus (can i upgrade to win98 at least? ) but will not open communications with the control module, i am using LPT port 1 with an IRQ of 7 ( i have also tried LPT port 2 with an IRQ of 5). The control module powers up and displays that it is awaiting communication from the computer and the engraver runs thru its self test. Any ideas out there ? It is a company machine and we would rather not have to replace it due to the cost.  |
|
#2
08-31-2009, 09:28 AM
| |||
| |||
Forgive my very poor English, I am using google translator to write you. You can use windows xp with the Gravostyle 98 program. (can download you with e-mule) I have a new hermes 3400 and functions me correctly in this way. Greetings, Diego. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New Hermes Engraver | aminear | Engraving Machines | 13 | 05-25-2012 01:40 AM |
| Need Help!- Hermes NHI 810 | 762x51 | Engraving Machines | 16 | 11-17-2011 03:30 PM |
| New Hermes routers | Laff Riot | CNC Machining Centers | 1 | 07-14-2008 07:34 PM |
| My Hermes engraver is on ebay. | samco | CNCzone Club House | 0 | 09-07-2007 12:34 PM |
| Neat PC38 w/module, 103M Controller...Win 3.1/386 and 12X12 x-y | polyNuker | Stepper Motors and Drives | 1 | 01-09-2007 03:15 PM |
| | |
New Hermes EP controller module v3400 
Linear Mode
