CNCzone Network: RFQwork :: 3Dstuffzone :: Welderzone
I am new here! first off all, i am from the Netherlands and my English is not verry well :-)
I have purchased an old gravograph VX89 machine and i would like some help!
I have a problem:
The company Gravograph in the Netherlands, won`t help me with my problem.They won`t support this type off machine anymore.
I want different fonts for my VX89, but i dont know, where i can buy them?
Is there anyone here, that can help me?
Vanessa, try www.sawmillcreek.org
There is a lot of US users of this equipment and possibly they will share some fonts with you.
Greetings from France.
The same happens to me for my VXM machine. No luck with Gravograph support.
Did you progress in solving your problem?
It`s a big problem!!!!!
I`am looking everywere for extra fonts, with no results.
i thought the diskettes could be copied,but thats not the case.
And if the original computer crashes, than i cant use my machine annymore.
so there is no progress.
We are the people you emailed in the UK. There is a way to copy floppy discs - you need a disc called Gravograph disc copy V4. You will also need a supply of 720kb (double density) discs. (high density will not work) to copy your discs onto. You need the actual floppy disc top copy you will not be able to get them back off of your hard drive controller.
Don't despair there is life for these machines if the hard drive controller fails - look up past links on this subject.
All the best
Hello, I'm from Spain i have 114 fonts and pictograms, 20 Job Digit and 20 Job Save Gravograph VX, if you are interested contact me (e-mail) firstname.lastname@example.org
Last edited by Superkart; 04-26-2010 at 01:14 PM.
By Daz620UK in forum Engraving Machines
Last Post: 02-29-2012, 10:41 AM
By allison in forum Engraving Machines
Last Post: 12-31-2009, 02:14 PM
By missi1467 in forum Engraving Machines
Last Post: 12-31-2009, 02:11 PM
By killerspost in forum Engraving Machines
Last Post: 10-10-2009, 12:06 PM
By dgreensill in forum Engraving Machines
Last Post: 02-09-2009, 10:12 AM