H-Square with Vision controller

Results 1 to 3 of 3

Thread: H-Square with Vision controller

  1. #1
    Registered
    Join Date
    Jan 2017
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default H-Square with Vision controller

    Hello,

    Anybody ever try operating an H-Square engraving table (1219) with a vision series 3 controller?
    Worth attempting?
    Many Thanks!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2016
    Location
    South Africa
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default Re: H-Square with Vision controller

    Quote Originally Posted by Kentuckydoofus View Post
    Hello,

    Anybody ever try operating an H-Square engraving table (1219) with a vision series 3 controller?
    Worth attempting?
    Many Thanks!
    I am busy rebuilding one with a cheap Chinese Stepper kit.

    Just short on time...

    Served by a Droid

    Last edited by SeanLe; 01-14-2017 at 02:19 AM.


  3. #3
    Registered
    Join Date
    Nov 2016
    Location
    South Africa
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default Re: H-Square with Vision controller

    In case you are interested. http://www.cnczone.com/forums/engrav...-software.html

    Served by a Droid



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

H-Square with Vision controller

H-Square with Vision controller