Need A Quote- Clean up some cuts in or near Delaware / Philadelphia / Baltimore

[DEDan]

I am working on building a cnc router table, and I need a few cuts on my 8020 cleaned up and squared off. I have the following in 1530:

2 pieces that need 1 end
3 pieces that need both ends, and need to be equal length when done.
4 pieces that need both ends, and need to be equal length when done.

That makes 16 ends.

Also, I have 2 pieces of cold rolled steel that I need to have the edges squaed up to the bolt holes. The first looks straight, but I would still like to have the edge squared off, and the second has a slight bow in it. They are 49in x 2.25in x 1/4 in. They need to be squared off along the length.

Thanks

Dan Eastburn

[DEDan]

Anyone?

[harryn]

Perhaps consider posting the city and state. Shipping will be a significant factor in a project like that.

Good luck.

Harry

[DEDan]

I was hoping to find someone local.

[microfusion]

I'm up in York Pa. About 30 miles north of Baltimore.

[DEDan]

Got it taken care of today. Stopped by a friends shop, and fixed everything.