Need A Quote- grooved steel cylinders

[threeninethree]

I was hoping someone could help me out. I need 3 items machined. Please see the dfx file attached for the specs. Material: regular tool steel I guess? Units: decimal inches

They are to be used as bending rollers in a jig for shaping ski and snowboard edging.


Thanks

[howd]

would like to help, but I can't open dxf files. Could you post in pdf? Thanks, Howard.

[Dualkit]

How wide is that .300 deep groove at the bottom of the .076 wide groove?
Can you design that out? That feature is going to be pricey to make, everything else is easy.

[mactec54]

How wide is the smallest slot I don't see a number/dimensions for that slot

[threeninethree]

Sorry the smallest groove is .025" wide. But if that is too small it can be bumped up.

[threeninethree]

here is a pdf

[cncclimber]

I don't see any major problems but do have a couple of questions. You have everything out to 4 decimal places, how close do they need to be? I am guessing the .250 hole through the middle needs to be fairly tight, what about the rest? How soon do you need these? Thanks.

[threeninethree]

RFQ Closed. Thanks