Please quote this part to be delivered in one week. All corners may be rounded .005. Tolerance is +- .001. To be sent to Clermont, FL 34711.
Any steel is fine.
Please quote this part to be delivered in one week. All corners may be rounded .005. Tolerance is +- .001. To be sent to Clermont, FL 34711.
Any steel is fine.
Last edited by kdoney; 08-24-2009 at 02:21 PM. Reason: file wasn't included
not a real good drawing is that center part cut out or does it extrude? any dimensions?
What are you using to view the dwg or dxf, textpad?
I have to sorta agree with Star.
This \/ is what you gave us.
I assume you want a coupling that is 1.5" dia by who knows how long?
I also assume that the 4 quadrant lines are supposed to be center lines? Not a cut detail.
DWG/DXF should have at least 1 reference dimension because they do NOT hold or show any scaling (Believe me I have been given midget parts before AND I even SUPPLIED REFERENCE DIMENSIONS TO THE A-Hole).
Assuming length of 3" - 1 week delivery = $740
www.integratedmechanical.ca
pm has ben sent
Well I get a dimensioned complete drawing when I access the dwg or dxf. How about a IGS or STEP. I'm not going back to shop class and filling in dimensions on a sheet.