Need A Quote- Tensile Specimens

[IITStaff]

Hello,



I would like to get a quote and approximate turnaround time for machining 16 tensile specimens. The material I'm testing has similar characteristics to those of Udimet 720 alloy. The type of sample I need is the T1C from the chart I include.



Measurements are as follows:

1" GL Spec

dia .252"

3/16" radius

1 1/4 " straight section
1/2"-13 threads

I would appreciate if anyone could provide me with a quote or a lab you know of that could help me.

Thanks

Chart

[Metalmanti]

your measurements:

"Measurements are as follows:

1" GL Spec

dia .252"

3/16" radius

1 1/4 " straight section
1/2"-13 threads"

these are T1B measurements

Do you need TIB or TIC as your statement says "The type of sample I need is the T1C from the chart I include. "

Also, will you provide the material?

[Metalmanti]

what exactly is the alloy? Udimet 720? annealed or precipitation hardened?
Thanks

[cncjunky]

What is the rockwell hardness of this material???
SENT PM

[cncjunky]

I wrote this guy a email a few days ago and left a message as you all can see yesterday, has anyone got a response from him?