Looking for (3) CNC Setup/Programmers

[wakates]

Growing company is looking to fill 3 CNC set up/programmer positions. Applicants must have knowledge of Mazatrol T Plus minimum, 640 T is a bonus. We need set up/ programmers that can run our Mazak Mills and Lathes with minimal supervision.

We are located in Clawson Michigan

ISO 9001:2000 company produces stainless valves and delrin manifolds for the industrial industry. We have a very clean stable work enviroment with a the hopes of finding 3 individuals that are looking for a long term job.

If you interested please contact me at paul@wakates.com

[fastolds]

Or you could outsource to a few small shops and everybody wins!!
www.hobbymachine.net

[wakates]

Thanks, we are looking for a more perminant fix.

[Fish]

Have you found anyone to fill your positions yet? Would you be interested in someone that had to move?

I have owned my own shop, and done everything that is required in running your own shop, including; programming, purchasing, financials, scheduling, sweeping, and fixing my old Mazak H25 Horizontal and AJV vertical. I have programmed and set-up up to 4-axis Horizontals (Mazatrol and Fanuc), and Live tooling lathes (including Y axis). I can program in Mastercam, Bobcad, Gibbs, Parametric and Mazatrol (T2, M2, M32 - no 6t40 yet). I can also run Solidworks fairly well, and have some experience with Autocad 2000 and Pro/E. Most of all, I am looking to live somewhere where manufacturing and industry is helped rather than hindered, as it is in British Columbia, Canada!!

Thanks,

Fish

[wakates]

Originally Posted by Fish Have you found anyone to fill your positions yet? Would you be interested in someone that had to move? I have owned my own shop, and done everything that is required in running your own shop, including; programming, purchasing, financials, scheduling, sweeping, and fixing my old Mazak H25 Horizontal and AJV vertical. I have programmed and set-up up to 4-axis Horizontals (Mazatrol and Fanuc), and Live tooling lathes (including Y axis). I can program in Mastercam, Bobcad, Gibbs, Parametric and Mazatrol (T2, M2, M32 - no 6t40 yet). I can also run Solidworks fairly well, and have some experience with Autocad 2000 and Pro/E. Most of all, I am looking to live somewhere where manufacturing and industry is helped rather than hindered, as it is in British Columbia, Canada!! Thanks, Fish

Fish,

You sound like you would fill one of our positions very nicely, what are you thinking as far as moving? I would be interested in talking with you more, email me at paul@wakates.com so we can further discuss the your potential move to the US.

Thanks
Paul

[cncturnmaster]

cncturnmaster@hotmail.com

I am a very experince CNC Mazak Programmer / set-up / operator. I am currently down on the gulf cost however I use to live and work in troy MI. for Dynamic precision Tool, there on Livernois. If your willing to foot the bill I am willing to relocate back there. If interested send reply to above e-mail address, and I'll send you a resume.