Need A Quote- Turning job 80 parts

[millman52]

Please find a .dxf & .dwg file attached of part.
Material is 1045 Turned Ground & Polished.
Open for bids till June 3 2009.
If bid awarded parts must be shipped within 14 working days of bid award.
Bidder must supply material.
Parts must be free of all burrs & chips & must be protected from oxidation during shipment.

Please submit any questions & bids to:
mullinsmachining@hotmail.com

Drawings revised

Thanks for noting mistake

After consulting with end user. Center hole can be drilled "X" drill as long as Total run out is .005 or less

[larry53]

The print has a size of 20mm but the dimensions show a 22 mm (.8661) unless I am looking at it wrong.

[Donkey Hotey]

What about the center hole? Is that drilled or do you really need to be +/- 0.001" on the diameter? That's going to mean reaming or boring ($$).

[millman52]

Drawing(s) have been revised.

[Michael.lee]

Originally Posted by millman52 Drawing(s) have been revised.

Millman,

We can machine the parts as per your drawing, please contact us for the detail.

Regards,
Michael
mail@union-mould.com