RFQ-part to be machined

[hoju1301]

I have a RFQ for this part.

Quantity of 6, made from delerin, tolerences held to 0.001 inch

please see attached solidworks 2008 file for part description.

Ideally this item would be fabricated by Tuesday 5/19 and shipped/received by end of the week at the latest.

If you are located in the Bay Area of California that would be great as well,but anyone is welcome to quote.

[larry53]

I have opened the file and want to make sure the scale is correct. What is the largest diameter of the part? I get .157 and .236 total length. If the file is a 1 to 1 this should be correct if not it want be.

[Dualkit]

Is that .001 included or +/- .001? We are talking delrin here, what temp do you
want them inspected at? Sorry for asking, the point is moot, most of the clowns
in here ignore tolerances when bidding. You will get $2 a piece regardless of the tolerances.

[hoju1301]

Originally Posted by Dualkit Is that .001 included or +/- .001? We are talking delrin here, what temp do you want them inspected at? Sorry for asking, the point is moot, most of the clowns in here ignore tolerances when bidding. You will get $2 a piece regardless of the tolerances.

+-0.001, inspected at 70 deg F

can you PM me with an official quote and we'll go from there? thanks!