RFQ perforated stainless cut and domed

[jschultz]

2 sizes:
9" and 12" diameter round perforated stainless disks 3/32" holes on 5/32" centers, staggered pattern, 22g.

The disks would then need to be domed so the center is approximately 3/4" higher than the edges. This reduces the flexibility of the part and the dome in general is needed for the design.

The center of the disk will need a 1/2” hole. (the exact size of this hole is yet to be determined)

Quote for various quantities of each sized disk – 10, 50, 100, 200, 500.

[Jparks54]

is this job still open??