Quote Coin Dies

[ardorlan]

Seeking Machinist for creation of Collar Coin Striking Dies Qty 8 to 12,
Each Custom, We will provide design/toolpath files from your recommended software. Dies are to be fully finished and hardened by you.

In your quote please include.

Your machine model and its accuracy.
Recommended compatible software.

We will be ordering 2 dies at first, with 6 to 10 more following shortly(30 days) after. Addtional dies above the original order may or may not be request.

[ardorlan]

These are for 27mm coin dies.

[ardorlan]

I will be making the designs/toolpaths in ArtCAM 2008 Pro.
must have bit of .005 mm size

[sebtool]

I'd be interested in taking a look at what you're working on, and quoting if feasible. We use SurfCam Velocity 2. Send files to sbtool@peoplepc.com.
Thanks,
Steve

[turningman33]

Hello,
If you are still in need of a quote, please send a file for me to look at. We would be interested in looking at anything you may need. We have cnc turning and milling capabilities.(mlgrimmett@ejourney.com)

Thanks,
Mike

[denjo]

Hello, we have a cnc mill/lathe each capable of holding tenths, please forward iges or step files to camstar@csolve.net, thanks.

[gabedrummin]

I have experince in building coining tooling . Have wire edm and sinker....have cnc mill to make electrodes ....please send files to gabedrummin@yahoo.com........thanks