Job Opening Oklahoma City - CNC - No Experience Necessary

[sfilippo]

Small Gasket and Manufacturing Company located on the south side in Oklahoma City currently has an entry-level position available in our CNC shop.

Oil and Gas based clients keep us going strong with lots of over-time.

The CNC shop consists of 14 CNC machines. Each employee has the freedom to program, set-up, and operate their assigned machines, so this is a unique opportunity for the right individual. (G-Code/Conversational)

The ability to read calipers and micrometers is a big plus! Also, the ability to read design prints is a must, but will gladly train the right person.

Highly experienced CNC machinists need not apply. This is a foot-in-the-door opportunity for a person who wants to learn all aspects of CNC, but has very little or no experience. Technical School Graduates welcomed!

The majority of our CNC parts are under 2" in diameter.

We operate Day Shift ONLY 8am to 4:30pm with weekends off. During heavy work loads, we may work from 6am to 6pm Mon-Fri & 7am to 11am Sat.

Contact Alan or Paul @ 405.619.7739 (7am to 5pm CST)

http://www.flancogasket.com

[sfilippo]

The CNC position for hire has been closed until further notice.

Business is very slow for now. We hope this situation will change soon!