RFQ - CNC'ing Plywood in Tampa, Fl Area

[Guma]

Hi, my name is Johnny and we are looking for a local shop to do some work for us. I own a small company manufacturing custom gaming supplies. We do custom poker tables and have up to this point done them by hand with the router. We recently started manufacturing custom ceramic poker chips and now time has become an issue. With the expansion of our business we are looking for someone to start cutting our custom tables on a CNC to save us some production time.

We use 3/4" hardwood ply to construct our tables. Most cuts would be simple oval or round cuts to create the shape of the table. In some instance we would need smaller holes (2 9/16") cut out to accommodate cup holders to be put into the table.

Right now times are a bit slow, we are only getting orders for about 4 or 5 tables a month, but we have seen swings of upwards of 12 to 15. If there is someone interested in doing some business together let me know.

Thanks - Johnny

[JB1]

Hello,

My name is Jim Brayden.I am the cnc programmer at Adaptive Equipment.I am
interested in doing some business with you.We are located in Gainsville.If you
are interested give me a call.I would like to come down and see what you do
and to discuss this further.It's not far and my car gets 46 m.p.g. Also used
to live in Clearwater and still get down there now and again.

Thanks
Jim
Ph 352 372 7821
Fax 352 372 1935
Cell 352 226 7547

[Mike R]

We have a 3 axis cnc router, in tampa. We would like to talk and see if we fit what you are tyring to do

[Mike R]

we do have a 3 axis cnc router in tampa, and would like talk and see if we can help.