CNC Programming needed for Wood shop

[MontyThurman]

Furniture/Decor Company looking to outsource CNC programing for our products. We will supply Autocad drawings. Please contact Don Mize or Monty Thurman at 317-915-9000 for further information.

[makinoman]

What kind of Machines are you using?
Are you wanting programming for lathes or mills or both?

Jon

[MontyThurman]

We have a (1) Fagor 8055 Machine, where we run sheet goods such as plastic laminates, Particle board, MDF, Foam and the combinations of all.

We have software Bob CADCAM v21 with BOB Art, but at this time do not have the resources to devote to learning and operate both machine and
software.

Hope this answered your question, if not please just give us a call to talk about your services.

[makinoman]

Hmmm I've never programmed for cutting wood or plastics before. All the parts I have done at my job have been aerospace parts, aluminum and titanium parts only. I've never heard of your machine so I am guessing that it is 3 axis only. Does your machine have proprietary controls or is it fanuc controls? Where I work I use solidworks and mastercam so I am familiar with those two. Not sure if I would be of much help to you, but if you like you can send me a drawing and I will see what I can do. And if you like what you see we can go from there.

A couple of questions for you:

You are only looking for cnc programming correct?

In other words you are not wanting someone to design a fixture or how to hold the part. You just want a program for cutting the part.

Who decides what tool(s) to use or do you just have general tools that you use for every part?

How often would you need this service, is it a one time deal or you constantly have different parts?

And last but not least what kind of turn-around are you looking for time wise?
I.E. How quickly are you needing the program after the drawing is produced?

[ToolMach_Aust]

Hello Don/Monty.

Spoke to you the other day about your requirements. let us know if you are still interested in discussing with us?..

cheers

Frans
frans@Toolmach.com.au

[silverfoxx03]

www.3dgalatea.com


they are awesome and will be able to help you out. Quick and reasonable.

[dahui]

Has this been awarded?

[blmartech]

i may be interested if it is still open, currently i program for a cabinet shop on a 5' x 10' cosmec machine and a masterwood point to point

i have software for casework and laminate doors with edge compensation, I also have a taig 4 axis cnc mill at home.

here is a clip of the Cosmec machine cutting

YouTube - CNC cutting homebrew mdf cnc router

YouTube - CNC cutting homebrew mdf cnc router

currenty program and operate, and maintain all machinery in a busy cabinet shop producing cabinets for hospitals, schools and many other commercial projects.

my website is www.cognitiveinnovations.com
(for my work from home)

[blmartech]

is this still open ?????