Need A Quote- Short Shifter

[mmmjboner]

How the part looks now:



How it should look after you're done:



The slot at the end is indexed to two indentions in the lower portion and that relationship needs to be retained.

I know the pictures aren't that great, so I will supplement them with what needs to be done:

-Turn down the middle 1/3 to the diameter of the notched end
-Cut the groove into the shaft (will be just above the 'bell' section
-Part off the notched end
-Notch the 'new' end of the shaft

I'm only interested in doing one of these at the moment. So what's it gonna cost me?

Thanks!

Jeremy

[gabedrummin]

Fifty bucks and shipping.....................