Logo RFQ

[Erik W]

Hi all, I was hopping someone could help me out. I need to produce a version of the attached logo for use in a custom shadowbox frame. Ideally I would like the piece to be done in 1/8 mdf, but am open to suggestions The size would be approximately 14 inches wide, by the correct proportion high. I'm not sure if anyone can do the coloring of the logo, or if I would have to do it after I got the piece. Either way, any help would be appreciated. Thanks in advance for your help.

[Arty 3000]

what kind of material are we talking about.

[Erik W]

I was thinking 1/8" mdf, but pvc is okay as well

[Arty 3000]

oh, sorry i missed it.