Job Opening Machinist CNC Appleton WI 7242

[lashbeck]

Contract position 2 openings
11-18 depending on experience and qualifications

Start-up, operation and shut-down of CNC Mill. Knowledge of all machine codes and their proper functions and format. Proper setting of height offsets, cutter compensation and floating zeros. Must own tools such as calipers, micrometers, gages, and various hand tools required to perform daily routines.

Must maintain proper feeds and speeds on the various types of materials used in the shop when using the tools listed.
-Fly Mills -Drills -End Mills -Reamers -Carbides
-Taps -Boring Bars -Hog Mills -Spot/Center Drills

Start-up, operation and shut-down of CNC Lathe. Knowledge of all machine codes and their proper functions and format. Proper setting of height offsets, cutter compensation and floating zeros. Must own tools such as calipers, micrometers, gages, and various hand tools required to perform daily routines.

Must maintain proper feeds and speeds on the various types of materials used in the shop when using the tools listed.
-Turning Tools -Threading Tools -Drills -Reamers -Carbides
-Boring Bars -Grooving Tools -Taps -Spot Center Drills

Absolute/Incremental positioning and programming and an understanding of sub-programs and when they are to be used. Knowledge of alarms and how to correct them when required.

Basic machine maintenance such as proper levels of fluids in oilers with correct oil or lube. Must keep ballscrews and ways free of chips and other debris. Required to have knowledge of all fabrication areas in order to cover for other shop personnel when out, assist in completion of a job, or train new employees when designated by the supervisor.

Responsible to meet ISO quality standards which require individuals to take responsibility for their own quality, verify their work is correct and then affix their signature to the appropriate documentation, i.e. drawing, checklist, etc. Uses MIS system to enter time spent working on fab parts.

Follows company's requirements to move and production receipt work orders. Complete all paperwork. Responsible for own safety. Practices only safe work habits and ensures all safety rules are followed. Responsible to keep area clean and organized to ensure safe working conditions.

This position requires machine tool technology, or equivalent experience or training, and three years of machine shop experience.

Requires ability to read blueprints and set-up sheets.

Requires knowledge of all machine codes and their proper functions, to include canned cycles and related codes, "G" and "M" codes, and "I" and "J" centers when using circular interpolation.

Position requires organized individual who pays strict attention to detail and is quality conscious. Ability to work with little or no supervision