Need A Quote- 6061 just a little complex

[mc-motorsports]

Need a quote for the following. Renderings attached. The two bores are fairly tight tolerance, -0.0/+.002"

Rough over all dimensions are 2.6" X 3.6" X 3.5"

Email me at mc_motorsports@hotmail.com and I will send you the CAD drawings. They were drawn in Rhino so .3DM, .DXF or .DWG

2 pieces per set, 6061 aluminum, surface finish and bore diameters are the only things that matter. Holes are tapped 1/4"-20, three of them are thru, the other two, depth is not critical, minimum .5" thread.

1 set consists of the piece shown and another that is a mirror image, will be in CAD drawings.

Will need a quote for 1 set for beta testing and quality approval, then a price for 25 sets.

I am outsourcing this because I just don't have time for it and I have local customers with cash in hand, need parts ASAP!

Please email me your quote and lead time, don't post prices hers.

Thanks!
Michael

[mc-motorsports]

Nevermind, renderings attached. Email me before quoting.

If you want the .3dm, let me know and I'll have to ZIP it to upload it on CNCZONE, thanks!

[Monte]

Originally Posted by mc-motorsports Nevermind, renderings attached. Email me before quoting. If you want the .3dm, let me know and I'll have to ZIP it to upload it on CNCZONE, thanks!

If you're using Rhino, try opening both of those drawings. I have v4, I had problems with both.

Monte

[mc-motorsports]

Originally Posted by Monte If you're using Rhino, try opening both of those drawings. I have v4, I had problems with both. Monte

Any way you can PM me your email address and I'll send you the .3dm and can you see about exporting it to .DXF please? For some reason I am having problems. That's my only complaint about Rhino, exporting files.

Michael

[Monte]

Originally Posted by mc-motorsports Any way you can PM me your email address and I'll send you the .3dm and can you see about exporting it to .DXF please? For some reason I am having problems. That's my only complaint about Rhino, exporting files. Michael

Okay.

[mc-motorsports]

Originally Posted by Monte Okay.

Thank you, sent that over.

MC

[mc-motorsports]

This job was awarded months ago. Thanks,
Michael