Need A Quote- RFQ wood part

[syon]

we're trying a test to see exactly what we can come up with on the finish.

[43220]

To all interested:

I invite you to make up a small sample (6 x 6 or so will do) of the 1/4" plastic material you have in mind routed/cut with a closely similiar pattern - cut/machined with down to 1/8" wide material left between cutouts/holes. Here's another close up of part showing cutout pattern - better specs will be furnished later.

Send to:

C/O Box 746
Evart, MI 49631

[keebler303]

You have not mentioned the quantity you are looking for. I think you will be hard pressed to find anyone to spend/waste the time on providing you a sample if you only need 1 or 2 of these. Its not fair to have a bunch of people quoting work when you don't tell them all the specs.

my $.02 worth

Matt

[43220]

Oh, probably looking for about 8-12 pcs for starters. It's allright if I just get samples of the material w/o any cutouts - I'll do that myself manually (drill press or router) to evaluate suitability.

Sup to youse.