303 SS 5/8 x 3 Bar source needed

[zcases]

I need a source for 303 Stainless in something close to 5/8 x 3. Anyone want to sell some of this? Or have a source? I would like to consider 3 options......If the 303 is really impossible to get reliably.....I suppose I will need to consider doing this in 304. Thanks for taking a look....
Scott

1) Just a source for the 303 bar stock would be fine

2) I would consider quotes for pre machined blanks 2.650 x 4 x .575 (+/- 0.005 all dims) in quantities of 5 or 20

3) I would consider quotes for pre machined blanks in accordance with the attached image (+/- 0.005 all dims) in quantities of 5 or 20

[Visnovits]

Here is a link to Speedy Metals

http://www.speedymetals.com/ps-1012-...d-pickled.aspx

Steve
Hava Turn LLC

[zcases]

Holy cow, the zone pulls through again, thanks Visnovits. Now if anyone wants to quote on the machining let me know as well.

Thanks again.....I searched pretty hard and couldnt find anyone selling this stuff. It sure does cut nice.

[doughtybrian]

Hello zcases,
PM has been sent with pricing on your blanks
Thanks Brian
Brians Machine & Powder coat
briansmachineandpowdercoat@yahoo.com
(405) 574-5910
(405) 224-7323

[g-coder05]

Phoenix metals in Atlanta specializes in ss. 303 is nice but try to get your hands on some 303EZ, kind of reminds me of machining 12L14.

[zcases]

Just want to make sure no else wants to quote this.......I will be awarding this pretty soon.

Thanks Brian