RFQ:Aluminum Turning/Milling/Waterjet*updated info*

[CatdrvR]

Hello fellow forum goers and machine shop owners. I am a rc construction modeler and the machines need to be built like the real thing or they don't hold up to the stresses. This is the first of many parts to be awarded contracts. If they turn out well I will order as many as 26 the first batch. There are 4 different parts that will combine to make one part. This isn't the final drawing but you get the idea, minor diameter changes to the mini bolt holes will be necessary. The overall diameter of the piece at it's widest is around 45mm to give you an idea.



Thanks for responding with prospective quotes.

~Dan

[AMW]

Hello, please send your files to applied.machineworks@yahoo.com, we will review them and provide you with pricing!

Thank you in advance for the opportunity to quote your job!

We look forward to hearing from you.
Regards

[CatdrvR]

Alright well with several requests for drawings, I will post up the general solidworks files. Keep in mind they are not 100% finished. The miniature hex bolt holes aren't the right diameter and need to be tweaked. Anyways here they are and thanks for the replies. I would like them to be quoted for one set, 10 sets, and 50 sets. Thank you guys in advance.


Edit - Well I realized I "uploaded" them but they were not in the right file type so they don't show in the thread. I emailed them out to anyone who requested them so it shouldn't be a problem.

Thanks again guys/gals!

~Dan

[ddprecision]

I would like to see drawings Email at ddprecisionmachining@yahoo.com Thanks Don

[AMW]

Anyways here they are and thanks for the replies

CatdrvR, I don't see the files ((( DON, DO YOU SEE THEM? )))
? ? ? ? ? ? am I blind?

I look forward to looking at them

[ddprecision]

Not here, just got the email. I think you got them as well in your email.

[Visnovits]

Please email prints to steve@havaturn.com

Thank you
Steve

[CatdrvR]

Just letting you guys know, I have changed it into one complete part to help keep costs low. If I did not re-email the refined part. Let me know. Also letting you guys know this will be the first of quite a few parts I will be requesting to be machined. Going to need at least 16 undercarriage rollers, 2 front idlers, various laser/waterjet cut parts. Thanks again for all the offers.

~Dan

[markjb]

please send drawing to mbanks63@hotmail.com

thank you
mark banks

[Runner4404spd]

please email prints to

jerry@superiordesignconcepts.com

Thanks

Jerry

[rickyt]

That looks like an interesting part, if you could e-mail to
heavychevy2155@yahoo.com I would like to quote also.

[RedGTZ]

I got the old one only, please send the new drawing to redgtz@hotmail.com

Thank you and have a great weekend!