Small part turned

[thecrow2k]

Not sure if this is in the correct area but im looking at getting onme or two small parts machined, speciafically turned on lathe. Both parts will be of a max diameter of 12mm and a maximum length of around 60mm. Both made of aluminium or steel.
Anyone who can do the following preferably as cheap as possible, please contact

[WILLwork4money]

If "CHEAP" is what you are looking for, "CHEAP" is what you will get!
There are plenty shops out there that will work cheap, and, "YOU WILL GET CHEAPly MADE PARTS"

>I had a customer turn me down on a 4,500 piece order, he went with somebody that under quoted me, $0.04 per piece, he told me that the $180.00 he was saving by going to the other guy would pay a couple utility bills for his shop.

Three weks later, he e-mailed me, wanted to give me the order, needed parts in 10 days, said the other guy sent him scrap parts " HE GOT WHAT HE PAID FOR "

I DIDN'T HAVE MACHINE TIME AVAILABLE WHEN HE CALLED, OFFERED ME A $250.00 PREMIUM IF I RAN THE PARTS FOR HIM, I DIDN'T DO IT!
((((( YOU WANT CHEAPEST PRICE, YOU WILL GET IT ))))

[thecrow2k]

Sorry, not with you. Im only wanting one to two parts machined.
A guy has generously offered to do me them in his spare time

[Visnovits]

Hello, I sent you a PM.

Steve

[DSL PWR]

Good, fast, and cheap, pick any 2.




Good work fast won't be cheap.

Good work cheap won't be fast.

Fast work cheap won't be good.

[larry53]

Made in China

[cadcamham7]

Amen to that.