Please forgive my ignorance as I'm just getting started experimenting with cnc.
I'd like to get 2 bearing blocks/flanges made up of aluminum. Open to suggestions for what grade AL.
1 bearing blocks will be for the free floating ballscrew side to house a single ball bearing of OD=~30mm or so.
1 block for the driven side to house 2 angular contact bearings, OD=~30mm.
I'll post a cad drawing and dimensions later, i would figure these could be done in a 2"x 4" x3" block.
I'm looking for a ballpark figure.
When you post those beloved cad files, I will make an offer for ya!