Job filled

[rkremser]

Ok I am in need of two very simple pulleys. I am looking for them to be .25" wide .125 ID .25 diameter pulley surface with approximately 1/16 lips extending from the .25 Diameter surface. Material would be aluminum. If this isn't clear i can sketch it up but i feel like it is simple enough. May as well quote shipping to 15238. Thanks for a fast quote, just a small and easy to make part. Sizes are all approximate aside from the .125 ID. Thanks



Thank you for all quotes, the job has been awarded.

[kmstool]

Originally Posted by rkremser Ok I am in need of two very simple pulleys. I am looking for them to be .25" wide .125 ID .25 diameter pulley surface with approximately 1/16 lips extending from the .25 Diameter surface. Material would be aluminum. If this isn't clear i can sketch it up but i feel like it is simple enough. May as well quote shipping to 15238. Thanks for a fast quote, just a small and easy to make part. Sizes are all approximate aside from the .125 ID. Thanks

Hi my name is Keith from kmstool. The two pulleys you want I can quote as follows: Material $8.00 labor $52.50 shipping $7.34 ups ground.
Grand total = $67.84. If you want the pulleys right away please contact me via e-mail at armybucko@msn.com. There's no need for a sketch. You can also reach me by phone after 2:30 pm pst. at 951-454-5535. Thanks for the opportunity, please don't hesitate to call me if you have any questions!