Need a few pieces plasma cut

[MAX711]

For anyone who's interested I'm looking for a quote on the attached plasma cutting job. These are parts for an auxiliary gas tank for a motorcycle, all flat, no bending in mild steel. I'm thinking 0.040" thickness or something close should be plenty strong enough, but am open to suggestions.

I need a pretty quick turn around so I can get it welded and fitted before June 20th.

Feel free to move the parts around on the drawing to best suit the cutting process.

The parts will be welded together so edge quality is not too important

Again, because it will be welded, overall accuracy is not critical, but accurate enough that the parts will fit together.

Please PM me with offers/questions

Thanks

Andrew Dance

[newarkprecision]

Where you located. I have a plasma table I could cut these for you. Im in Newark Ohio zipcode 43055