RFQ....Acrylic or Polycarbonate

[dvsmac]

Here is a part I need made from Acrylic or Polycarbonate,
Just one problem.........it has to be optically clear when viewed from the threaded side to the 7 degree tapered side, so its either vapor polished polycarb or flame polished Acrylic (Note the tolerances if flame polishing)
All I need right now is just 1 (one) part, the drawing is in metric and ISO 2768-M tolerances apply.
See attached pdf files for part and tolerances. This is a prototype pump flange so we can film the formation of micro bubbles (if present) while the pump is running.
We can machine the part in house but its the polishing we have no experience at so we want to sub out the job complete

[thkoutsidthebox]

You forgot the drawing.

[dvsmac]

the PDF files are too big.....I can email them

[dvsmac]

The part is approx 140 mm od with a 1 7/16 - 12 UN thread for a Flaretek fitting and a bolt hole at 120 mm BC.
if interested I can email the files

[Steeda31505]

If you have an idea you need engineered or manufactured wether it's a rapid prototype or a full parts run, check us out www.spencercadcam.com We offer full engineering capabilities, design work, CNC programming, and manufacturing. Our prices are very cheap because we want your business, were interested in helping you... not breaking your bank. Contact us through our website if you have any questions.

[RedGTZ]

If this job is not awarded, please contact me. Our company is specialized in CNC machining of plastics and non-ferrous alloys. We can also polish you part in house if you need a perfectly translucent finish.

[dvsmac]

I found a local supplier for this part