Anybody do waterjet work!! RFQ

[blurrycustoms]

I need the part below cut via waterjet, laser, plasma, or whatever!

1. Material: 1/4" A36 or better steel plate
2. Quote with and without material. I can get material for pretty cheap, but I would like not to have to ship it.
3. Quantity - 4 (with a possibility of more in the future.)
4. Drawing is posted below.
5. Time Frame - By the end of February
6. No finishes, and no deburring!

PM me for questions. This seems like a pretty simple load and cut type of job,I've even done the dxf file for it.

Thanks,
Alex Burt
I thought this was pretty sweet! -->>

[fireman_1977]

I am working up a quote for you to Laser these right now. This should be your most economical route.

Jason Cunningham

I need the part below cut via waterjet, laser, plasma, or whatever!

1. Material: 1/4" A36 or better steel plate
2. Quote with and without material. I can get material for pretty cheap, but I would like not to have to ship it.
3. Quantity - 4 (with a possibility of more in the future.)
4. Drawing is posted below.
5. Time Frame - By the end of February
6. No finishes, and no deburring!

PM me for questions. This seems like a pretty simple load and cut type of job,I've even done the dxf file for it.

Thanks,
Alex Burt
I thought this was pretty sweet! -->>

[Elsie Green]

We have a waterjet capable to cut 120in x 60in up to 4 in thick. We would like to Quote your parts. We need to know if we can cut 1 inside part to the outside because need .100 between parts?

[blurrycustoms]

That would be fine, but please quote with material.

Thanks

[Elsie Green]

I need the part below cut via waterjet, laser, plasma, or whatever!

1. Material: 1/4" A36 or better steel plate
2. Quote with and without material. I can get material for pretty cheap, but I would like not to have to ship it.
3. Quantity - 4 (with a possibility of more in the future.)
4. Drawing is posted below.
5. Time Frame - By the end of February
6. No finishes, and no deburring!

PM me for questions. This seems like a pretty simple load and cut type of job,I've even done the dxf file for it.

Thanks,
Alex Burt
I thought this was pretty sweet! -->>

Alex,

Here is our quote for your parts:

1. Material: 1/4" HR P&O, Scale Free
2. Quantity Minimum (4)
3. Ship date by the end of Feb., sooner if needed
4. Materials cut on waterjet are virtually burr free

Material and labor to cut $231.50
Setup charge: $50.00
FOB: Whiteville, TN 38075

Thanks