RFQ Aluminum trigger assembly

[cdarnell]

Hello guys,
I need a quote for a trigger assembly I am looking for raw aluminum finish that can me annodized.

there are 3 parts to it a flat side plate with holes in it, another side plate with some risers and pins milled into it and then a trigger the drawings I am attaching are close to being complete but I wanted to get am idea of cost to make sure it is a path I want to persue.

the 2 side plates are the same size and I left the dimensions off the one with the risers for clarity use the dimensions from the other plate. the trigger has 3 4-40 tapped holes to hold set screws.

I will be looking for price for 10 qty and for 50 qty

http://www.maddmanproducts.com/Home_Page/trigger.pdf

http://www.maddmanproducts.com/Home_...iggerplate.pdf

http://www.maddmanproducts.com/Home_...ggerplate1.pdf

http://www.maddmanproducts.com/Home_...erassembly.pdf

[fastolds]

if have have solid models I would like to run some machine times. hobbymachine at mchsi dot com

[cdarnell]

They are on the way

if have have solid models I would like to run some machine times. hobbymachine at mchsi dot com

[zcases]

cdarnell - can you send iges or step files to zcases <at> frontiernet <dot> net also? Thanks in advance
Scott

[cdarnell]

cdarnell - can you send iges or step files to zcases <at> frontiernet <dot> net also? Thanks in advance
Scott

they are on the way
Thanks Craig

[Clawsie Machine]

PM sent. Thanks, John

[zcases]

Email sent........

[Clawsie Machine]

Craig, please check your email. Thank you, John

[SeaSchell]

P.M Sent

Dave Schell
SeaSchell tackle Machining/Manufacturing
seaschell_tackle@sbcglobal.net