| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Employment Opportunity Looking for a job in the machining field, need a employee in the CNC field post it here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-27-2006, 02:11 PM
| |||
| |||
We have a CNC table the Y axis is 3000mm, and driven by two Panasonic servo motors, one on each side. Right now it has overload and out of sync problem. It is a new machine, we think it just need some adjustment. If some is expert in this area and can offer help. please send PM. Thanks.    |
|
#2
11-27-2006, 03:10 PM
| ||||
| ||||
| If it is a new machine, the first thing to do is contact the supplier, there are different methods for sync'ing servo's, often the encoder on one is slaved to the other. Al.
__________________ “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
11-27-2006, 03:36 PM
| |||
| |||
| New machine means we made it ourself and not used it yet. Does any have experience how to use dial indicator? |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
