RFQ: Pulley parts

[vadimvc]

Hello

I am looking for a quote for a few parts. Please quote every part individually.

I will need
1x roundpulley.dxf
3x wheel.dxf
3x wheel.dxf (without final 3/8 OD x 3/16 long flange)
1x Shaft pulley.dxf

Please send your quotes to vadimvc [at] gmail [dot] com

Thanks
--Vadim

edit: Lead time for this would be around a month, maybe a nice Christmas present

edit: You would need to provide stock.

[markjb]

has this been awarded. if not email prints to mbanks63@h0tmail.com.

[vadimvc]

Email sent

These have not been awarded. For that matter I'm yet to even get a single quote.

[eddie6675]

Hi, I'm having troublemy soft ware so I can't open these file right now,could you send a pdf? would be happy to quote. I've got open machine time rite now.

http://www.thecornershoponline.com/index.html

[vadimvc]

Sure, here are the pdf's

[eddie6675]

Hi vadmvc, Thank you; You should have some prices within a couple of hours..
I do have some questions...On the shaft pulley: is the shaft integral (6061 turned down) or a fitted part either press or running fit? If it is part of the shaft pulley I'll need an over-all length or some-thing to describe the shaft length. And as for the wheel: What's the out side diameter? Other wise, they seem to be pretty sriaght forward parts.
Thanks, Eddie

[larry53]

Please send any dwg files or any solid modeling files in a stp or iges format and I will send a quote to you. thanks Larry

[vadimvc]

Amazing how everyone wants something different.

I attached the files

You will have to rename them to .igs since this forum does not allow IGS uploads.

Thanks for quoting

--Vadim

[eddie6675]

Hi. I can run the:
3 wheel pulleys for $34.00
1 larger pulley for 30.00
and shaft pulley for 15.00
This covers material, set up and shipping.
I can have these to you by Christmas, but kinda close.
Thanks agian, Eddie6675

[vadimvc]

In my original quote I wanted 6 total of the wheel pulleys (3 with the hub 3 without, could you quote on those as well)

Thanks

--Vadim

[eddie6675]

Hi, Sorry for the delayed response, (out of town and my modem died) I would only charge $5.00 per pulley above the first quote, because the set up is all-ready done at that point. Thats the hard part of the job.

[vadimvc]

I should be able to reply very soon hopefully awarding you the job but to just to clarify one last time.

3x Wheel pulley.dxf - 34
3x wheel pulley.dxf (with no hub) - 15
1x larger pulley.dxf -30
1x shaft pulley.dxf - 15

Total cost - 94, includes shipping, stock and machining.