Looking for CNC operator or shop in Los Angeles

[originator]

I am almost done developing a product that will be released to the public within a month or so locally, then will expand in print ads nationally after a few months. There are several aluminum parts that I already have programmed and am milling myself on a benchtop. The time is approaching where I wont be able to do the labor any longer, and would like to find someone local to work with as the product takes off. I have considered renting a small space and putting a shop if need be, but if someone had a shop that would be fine as well. There are approximately 9 parts that are straight forward and simple. One of the parts is quite detailed and takes me about 3 hours to make.

We are targeting hotels for our product, so there is a real possibilty that there will be large runs. The work will come in slowly, so this is not a big deal just yet. If anyone is interested please write me at toddjchapman at hotmail.

Thanks