I need a RFQ on a simple pull pin to be done on a lathe, preferrably CNC. Pin dimensions are roughly 1/4" shaft by 1.25" long with a 1/2" head total length a little over 1.5" long. Have detailed CAD drawings on hand. Need a quantity of about 100 for the first run so CNC would make things quick. Part requires only 1 or 2 cutters and a part off blade. Made of 7075-T6 aluminum 1/2" x 3' extruded rod provided by me. I have a manual lathe - just don't want to crank out 100 of them by hand. Email to email@example.com or message me on here, or post in this thread. Thanks for looking!