07-28-2006, 09:12 AM
|
| | | Join Date: Apr 2005 Location: USA
Posts: 46
| |
RFQ - Need a prototype foam wing core cut | |
I need a prototype wing core cut. It's a 2 panel 80" wing, so each wing panel is 40 inches.
I will provide a DXF with the root and tip airfoils and it shows all the exact measurements. Here's a quick rundown of what each panel looks like:
Chord Length: 19.65
Sheeting Allowance: 1/16th"
Panel Length: 39.85
Root Chord Length: 19.65
Tip Chord Length: 14.21
Tip Setback (Leading Edge): 2.10
Send email to qcoldir at yahoo.com
Q |
Linear Mode
