I am currently looking for a part time position in the San Jose area. I am attending machining classes at DeAnza in the evening and will be limited to work 3 day weeks when class begins again in September.
I have 10 plus years in electronics manufacturing industry troubleshooting and programming equipment. My current list of completed classes include Mastercam X, 9 and Introduction to Machining. I also have some experiance operating manual mill and lathe.
Feel free to send me an e-mail if you need a shop hand.
hi rick yes i have a problem with art 9.0,when i try to run one of the sample programs provided with art,the drawing comes on the screen,and then it starts to produce an organic surface,right when it finishes the surface the drawing disappears. any ideas would be appreciated. thanks