Parts RFQ Machining 6061

[hoju1301]

I'd like to get quoted for the 3 different parts I have. Drawings are attached in ACAD 2000i DWG format.

All parts:
-6061 AL
-all tolerences to +-.01, but holes/slot tolerence should be -0.000 +.01.
-Deburred edges
-raw finish
-Shipping prepaid by myself both ways.

Part 1:
This is an aluminum disc 1/2 thick with a 3/8 hole through the middle and a 5/8 rounded slot on top (with a ballnose endmill or equiv). I will be providing the materials, and the circular shape is already made as it is just cut from 3" dia 6061 bar stock to 1/2 thicknesses.

All the machining that needs to be done is that rounded slot, and the 3/8 hole in the middle.

Part 2:
Rectanglar part. Using 1"x1" barstock, all I need is the holes and threads machined. The 1"x1" need not be machined in fact, and the length cut to 1.5" can be cut with a band saw and finish left raw.

Part 3:
rectanglar part
once again using 1"x1" barstock, all i need is the holes and threads machine. Facets of the barstock need not be machined and the length of 2.25 cut from barstock can be left raw.
-------
Please quote all parts per item cost with 20,50,100 parts being made in one production run (i.e say 50 parts made, 5 dollars each, 250 dollars total for 50).

Thanks!
~Anthony

[mikeh78]

Anthony,
Email me at michael.hesse@hessemachine.com and I will send you a quote.
thanks

Mike Hesse

[zcases]

Anthony - please send me an email also and I will reply with a quote.
Thanks
Scott

zcases@frontiernet.net

[Runner4404spd]

please send me the info at

jerry@superiordesignconcepts.com and i will get you a quote later today.

[szyman76]

Anthony,
Email me at szyman76@yahoo.comand I will send you a quote.
thanks
Paul

[j-radkemachine]

fax: 254-576-2593
email: jasonradkemachine@valornet.com
thanks,
jason

[hoju1301]

Thanks for the replies everyone. I have chosen a vendor and we are proceeding with production. Will keep everyone in mind for future jobs.