RFQ CNC Plasma work needed

[ckrantz]

Need 30 brackets plasma cut, I've made a basic DFX of the part and attatched it. These will be .250" thick 1018 cold roll. I haven't made the final .DFX of the part but this is basically it. I will supply the metal, I just need the machine labor. Give me an idea how much you will charge for 30. If everything turns out okay, good opportunity for many more different brackets I need made up.

[Verfur]

does it have to plasma cut?

How about waterjet cut no haz to deal with.

John

[rpage]

Sent you a private message. Thanks.

Rick

[ckrantz]

You can go ahead and quote me for a waterjet if you'd like. If its cost effective I wouldn't mind the better quality.

[Verfur]

sent PM

John

[ckrantz]

Anyone else able to produce these using a waterjet or plasma?

[tjones]

Will get quote back asap.

Tim

[fuzzman]

You have a PM.

George

[Dave257]

Need to know what tolerances and finish you want. makes a difference in the price..plasma creates a kerf (slight angle on the edge)..Can you accept that?
Also , it may be cheaper to have the material supplied. why pay to ship it , unless you get someone local to you..
Dave