| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Employment Opportunity Looking for a job in the machining field, need a employee in the CNC field post it here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-19-2006, 10:36 AM
| |||
| |||
I need a small brass plate about 1"X2"x.187 with two lines engraved in it: WM SELLERS & CO PHILADELPHIA The engraving needs to be .750 wide with normal spacing and needs to be mirror image. This will be used as a mold. Type style - Arial or similar. For more info email me or post. Thanks
__________________ Jack Mc Kie [URL=http//www.freshwatermodels.com]Freshwater Models[/URL]    |
|
#2
01-19-2006, 12:09 PM
| |||
| |||
| Jack, You may need to re-think your text width or font or both. Using Ariel with the text width at approx .750, some of the distances between the lettering is less then .002. This distance may fluctuate somewhat between CAD programs but still they will be quite close. Ken |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
